HYDAC International CS1000 Series, Инструкция по эксплуатации и техническому обслуживанию

Страница: 49 / 100

Analog output
HYDAC Filtersysteme GmbH en Page 47
BeWa CS1000 3247149l en.doc 2006-07-24
11 Analog Output ( ANaOUT )
The analog output is available as a 4 – 20 mA or 0 – 10 V DC signal.
The following signals can be selected in the measurement menu:
•
SAE AS 4059 classes, see section 11.1
•
ISO code according to 4406:1999, see section 11.2
•
ISO code according to 4406:1987, see section 0
•
NAS class 1638, see section 11.4
•
Fluid temperature, see section 11.5
11.1 SAE Classes acc. to AS 4059
The following SAE values can be outputted via the analog output:
•
SAE A-D (SAEMAX): Only a single value is outputted (see section 11.1.2).
•
SAE A / B / C / D: All values are sequentially outputted time-coded (see section 11.1.3).
•
SAE A / SAE B / SAE C / SAE D: Only one value is outputted (see section 11.1.4).
•
SAE + T: All values are sequentially outputted time-coded (see section 11.1.5 below).