HP BL30p - ProLiant - 1 GB RAM, Руководство по устранению неисправностей

Страница: 96 / 152

Error messages 96
Invalid memory types were found on the same node. Please check DIMM compatibility. - Some
DIMMs may not be used
Description : Invalid or mixed memory types were detected during POST.
Action: Use only supported DIMM pairs when populating memory sockets. Refer to the applicable server
user guide memory requirements.
Invalid Password - System Halted!
Audible Beeps : None
Possible Cause : An invalid password was entered.
Action : Enter a valid password to access the system.
Invalid Password - System Restricted!
Audible Beeps : None
Possible Cause : A valid password that does not have permissions to access the system has been
entered.
Action : Enter a valid password with the correct permissions.
Memory found on unpopulated Node. — Processor is required to be installed for memory to be
used.
Description : The system detects DIMMs, but is unable to use the DIMMs because a processor is not
installed in the corresponding socket.
Action: To use the installed DIMMs, install a processor in the corresponding socket.
Mixed processor speeds detected. Please make sure that all processors are the same speed. —
System Halted!
Audible Beeps : 1 long, 1 short
Description : Mixed processor speeds are not supported.
Action : Refer to the server documentation for supported processors. Be sure that all installed processors
are the same speed.
Network Server Mode Active and No Keyboard Attached
Audible Beeps : None
Possible Cause : A keyboard is not connected. An error has not occurred, but a message is displayed
to indicate the keyboard status.
Action : No action is required.
NMI - Button Pressed!
Audible Beeps : None
Possible Cause : The NMI button was pressed, initiating a memory dump for crash dump analysis.
Action : Reboot the server.