HP BL30p - ProLiant - 1 GB RAM, Руководство по устранению неисправностей

Страница: 101 / 152

Error messages 101
100 Series
101-I/O ROM Error
Audible Beeps : None
Possible Cause : Options ROM on a PCI, PCI-X, or PCI Express device is corrupt.
Action : If the device is removable, remove the device and verify that the message disappears. Update
Option ROM for a failed device.
101-Option ROM Checksum Error...
...An add-in card in your system is not working correctly. If you have recently added new hardware, remove it and
see if the problem remains. If this message goes away after you remove your new hardware, there may be a
problem with the add-in card.
Audible Beeps : 1 long, 1 short
Possible Cause : An expansion board in the system is not working correctly.
Action : If you have recently added new hardware, remove it and see if the problem persists. If this
message goes away after you remove the new hardware, there may be a problem with the expansion
board. Review the expansion board documentation, and then try reinstalling the board.
101-ROM Error
Audible Beeps : 1 long, 1 short
Possible Cause : System ROM checksum.
Action : Run Insight Diagnostics (" HP Insight Diagnostics " on page 61 ) and replace failed components as
indicated.
102-System Board Failure
Audible Beeps : None
Possible Cause : 8237 DMA controllers, 8254 timers, and similar devices.
CAUTION: Only authorized technicians trained by HP should attempt to remove the system board. If you
believe the system board requires replacement, contact HP Technical Support before proceeding.
Action : Replace the system board. Run the server setup utility.
102-System Board Failure, CMOS Test Failed.
Audible Beeps : None
Possible Cause : 8237 DMA controllers, 8254 timers, and similar devices.
CAUTION: Only authorized technicians trained by HP should attempt to remove the system board. If you
believe the system board requires replacement, contact HP Technical Support before proceeding.
Action : Contact an authorized service provider for system board replacement.