HP BL30p - ProLiant - 1 GB RAM, Руководство по устранению неисправностей

Страница: 134 / 152

Error messages 134
IMPORTANT: Processor socket 1 and PPM slot 1 must be populated at all times or the server does not
function properly.
•
PPMs, except the PPM installed in slot 1
•
DIMMs, except the first bank
•
Hard drives
•
Peripheral devices
2.
Install each remaining system component, rebooting between each installation to isolate any failed
components.
3.
Clear the system NVRAM.
4.
Replace the system board.
IMPORTANT: If replacing the system board or clearing NVRAM, you must re-enter the server serial number
through RBSU (" Re-entering the server serial number and product ID " on page 57 ).
Message ID: 4137
Severity : Error
Description : The processor in slot X , socket X has corrected an excessive number of internal errors. The
system will continue to operate.
Action : Replace the processor.
Message ID: 4140
Severity : Warning
Description : The system is operating with a heterogeneous processor environment.
Action : None
Message ID: 4141
Severity : Warning
Description : Only X out of the X installed processors have been started by the operating system. The
system will continue to operate.
Action : Confirm that the license agreement in use supports all of the installed processors.
Message ID: 4169
Severity : Warning
Description : The processor in slot X , socket X has corrected an excessive number of internal errors. The
system will continue to operate.
Action : Replace the processor.
Message ID: 4190
Severity : Error
Windows
®
Event Log processor error codes