manualshive.com logo in svg

HP BL30p - ProLiant - 1 GB RAM, Руководство по устранению неисправностей

HP BL30p - ProLiant - 1 GB ОЗУ. Бесплатно загрузите Руководство по устранению неполадок для этого продукта. Получите доступ к детальным инструкциям и советам по устранению проблем. Скачайте руководство с manualshive.com прямо сейчас и обеспечьте бесперебойную работу вашего устройства.

Поделиться
Скачать
background image

 

Software tools and solutions  60 

The Virtual Machine Management Pack provides the following functionality: 

•

 

Central management and control of VMware® and Microsoft® virtual machines with physical host to 
virtual machine association 

•

 

Easy identification of VMs or host servers reaching high CPU, memory, or disk utilization levels 

•

 

Highly flexible move capabilities that enable live moves and moves to dissimilar host resources 

•

 

Back up, template, and alternate host capabilities that enable restoration of VMs on any available 
host 

The Server Migration Pack automates the manual processes required for migrating servers between 
physical or virtual platforms (P2V, V2P, and V2V), enabling easy migration to appropriate physical or 
virtual platforms that meet performance and capacity requirements. 

For more information about virtualization management software, see the HP website 
(

http://www.hp.com/go/vmmanage

). 

 

HP ProLiant Essentials Server Migration Pack - Physical to ProLiant Edition 

The HP ProLiant Essentials Server Migration Pack – Physical to ProLiant Edition (SMP – P2P) software 
enables administrators to upgrade or replace an existing server. SMP – P2P is an automated, accurate, 
and affordable tool that migrates existing servers and their content to the latest server technologies. 

SMP – P2P automates the migration of the operating system, applications, and data from one server to 
another without errors, eliminating the need for manual redeployment of these elements on the new 
server. During the migration process, the software automatically removes old drivers and loads new 
drivers on the destination server. The wizard-based user interface simplifies migration and requires no 
additional training. 

For more information about the SMP – P2P, see the HP website (

http://www.hp.com/go/p2p

). 

 

HP BladeSystem Essentials Insight Control Data Center Edition 

HP BladeSystem Essentials Insight Control Data Center Edition is an integrated suite of software that 
simplifies the management of HP BladeSystem infrastructures. Using a wizard-based installer, Insight 
Control Data Center Edition installs and configures HP Systems Insight Manager (HP SIM) and HP ProLiant 
Essentials management software rapidly and consistently, reducing manual procedures and enabling a 
faster deployment of production HP server blades. 

The software installed by Insight Control Data Center Edition delivers core management functionality for 
HP BladeSystem lifecycles, including hardware resource deployment, health monitoring, performance 
monitoring, vulnerability scanning, and patch management. Insight Control Data Center Edition is 
delivered as a standard feature of HP BladeSystem c-Class enclosures and is available as a software 
option for HP BladeSystem p-Class environments. 

For more information about Insight Control Data Center Edition, see the HP website 
(

http://www.hp.com

). 

 

HP Control Tower 

HP Control Tower is an all-in-one software package that provides management and deployment for HP 
BladeSystem and its ProLiant BL p-Class server blades. 

Built on Linux, it delivers an easy-to-use interface tailored to blades and optimized for Linux users. HP 
Control Tower enables operating system deployment using both standard installation and image-based 
technologies. 

For more information about HP Control Tower, see the HP website 
(

http://www.hp.com/go/controltower

). 

Содержание BL30p - ProLiant - 1 GB RAM

























































































































































Отзывы:

Нет отзывов

Похожие инструкции для BL30p - ProLiant - 1 GB RAM

UGREEN CM656 Manual preview
CM656
Бренд: UGREEN Страницы: 9
NetComm NP202WN Quick Manual preview
NP202WN
Бренд: NetComm Страницы: 6
aqprox! appUSB150DAV2 User Manual preview
appUSB150DAV2
Бренд: aqprox! Страницы: 37
Sharkoon Mobile DAC Manual preview
Mobile DAC
Бренд: Sharkoon Страницы: 40
National Instruments 68VHDCI-50F SSR 8 Installation Manual preview
68VHDCI-50F SSR 8
Бренд: National Instruments Страницы: 4
Asus USB-AC51 User Manual preview
USB-AC51
Бренд: Asus Страницы: 26
Asus USB-AC50 User Manual preview
USB-AC50
Бренд: Asus Страницы: 36
Asus USB-AC53 Quick Start Manual preview
USB-AC53
Бренд: Asus Страницы: 2
Cisco LINKSYS PLTS200 Quick Installation Manual preview
LINKSYS PLTS200
Бренд: Cisco Страницы: 4
Cisco Linksys SPA 2102 User Manual preview
Linksys SPA 2102
Бренд: Cisco Страницы: 15
Cisco Linksys USBBT100 Quick Installation Manual preview
Linksys USBBT100
Бренд: Cisco Страницы: 6
Cisco Linksys RT31P2 Quick Installation preview
Linksys RT31P2
Бренд: Cisco Страницы: 2
Cisco LINKSYS USB1000 Quick Installation Manual preview
LINKSYS USB1000
Бренд: Cisco Страницы: 4
Cisco LINKSYS USB1000 User Manual preview
LINKSYS USB1000
Бренд: Cisco Страницы: 29
Cisco AIR-CB21AG-E-K9 Datasheet preview
AIR-CB21AG-E-K9
Бренд: Cisco Страницы: 8
Cisco AIR-CB21AG-W-K9 Installation And Configuration Manual preview
AIR-CB21AG-W-K9
Бренд: Cisco Страницы: 170
Cisco Linksys PLEK500 User Manual preview
Linksys PLEK500
Бренд: Cisco Страницы: 270
Cisco Linksys USB300M Quick Installation Manual preview
Linksys USB300M
Бренд: Cisco Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды