HP BL30p - ProLiant - 1 GB RAM Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 152

background image

Common problem resolution 16

Components for option firmware updates are also available from the HP Storage Products Software and
Drivers website (

http://www.hp.com/support/proliantstorage

).

1.

Find the most recent version of the component that you require. Components for controller firmware
updates are available in offline and online formats.

2.

Follow the instructions for installing the component on the server. These instructions are included with
the CD and on the component website.

3.

Follow the additional instructions that describe how to use the component to flash the ROM. These
instructions are provided with each component.

View additional documentation on updating firmware, such as the

Regular Firmware Updates Essential for

Optimal Performance and Functionality of HP ProLiant Servers

white paper, on the HP ROM-

BIOS/Firmware Updates website (

http://h18023.www1.hp.com/support/files/server/us/romflash.html

).

Hard drive guidelines

SAS and SATA hard drive guidelines

When adding hard drives to the server, observe the following general guidelines:

•

The system automatically sets all drive numbers.

•

If only one hard drive is used, install it in the bay with the lowest drive number.

•

Drives must be the same capacity to provide the greatest storage space efficiency when drives are
grouped together into the same drive array.

NOTE:

ACU does not support mixing SAS and SATA drives in the same logical volume.

SCSI hard drive guidelines

•

Each SCSI drive must have a unique ID.

•

The system automatically sets all SCSI IDs.

•

If only one SCSI hard drive is used, install it in the bay with the lowest number.

•

Drives must be the same capacity to provide the greatest storage space efficiency when drives are
grouped together into the same drive array.

Hot-plug SCSI hard drive LED combinations

Activity
LED (1)

Online LED
(2)

Fault LED
(3)

Interpretation

On, off, or
flashing

On or off

Flashing

A predictive failure alert has been received for this drive.

Replace the drive as soon as possible.

On, off, or
flashing

On

Off

The drive is online and is configured as part of an array.

If the array is configured for fault tolerance and all other drives in the
array are online, and a predictive failure alert is received or a drive
capacity upgrade is in progress, you may replace the drive online.

On or
flashing

Flashing Off

Do not remove the drive. Removing a drive may
terminate the current operation and cause data loss.

The drive is rebuilding or undergoing capacity expansion.

«
...
14
15
16
17
18
...
»

Содержание BL30p - ProLiant - 1 GB RAM

























































































































































Отзывы:

Нет отзывов

Похожие инструкции для BL30p - ProLiant - 1 GB RAM

Бренд: Sennheiser Страницы: 1

Бренд: 3idee Страницы: 7

Бренд: cable matters Страницы: 8

Бренд: National Instruments Страницы: 14

Бренд: ZyXEL Communications Страницы: 2

Бренд: Hama Страницы: 4

PCI to USB Host Adapter 60800

Бренд: LSI Страницы: 10

Бренд: Alvarion Страницы: 2

Бренд: ASIX Страницы: 16

Бренд: Tenda Страницы: 33

Бренд: Renkforce Страницы: 4

Бренд: Akitio Страницы: 8

Бренд: MSI Страницы: 102

Бренд: JVC Страницы: 44

Бренд: Mitsubishi Страницы: 250

XE602 - Powerline Ethernet Adapter

Бренд: NETGEAR Страницы: 2

Бренд: PlugLink Страницы: 42

Бренд: Vitek Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды