Honeywell Fusion4 MSC-L Скачать руководство пользователя страница 505

Страница: 505 / 531

Operation - Service Technician Operations

Part No.: 4418309_Rev09

Fusion4 MSC-L

Honeywell

Installation & Operation Manual

5 - 317

4. Bay Configuration: Includes configuring bay permissive. For

example, overfill, bay alarms, and so on.

See 5.13.2 - Bay Configuration,

for more information regarding the

configuration of the parameters and the entities.

5.23.3 Configuration File

You can configure the MSC-L using user interface; but it can be time

consuming.
Retrieving and installing the configuration file using the Fusion4 LAD is

a time saving option that can be used effectively in situations where

there are multiple MSC-L devices with similar configurations.
Following are the XML based configuration file features.



Retrieved and installed through the Fusion4 LAD.



Prepared/modified offline (safe area).



Contains all the configuration entities in the device except for the

following:



The workflow



The authorization databases



Recipes

See FIGURE 5-47 for the contents of the configuration file.

FIGURE 5-47

Configuration file

The following table provides the description of the fields in the

configuration file.

Field

Description

Name

The name of the entity as it appears on the MSC-L.

Content

The description of the enumeration options, otherwise empty.

Value

The value of the entity.

Содержание Fusion4 MSC-L




















































































































































































































































































































































































































































































































































Результаты поиска

Содержание Fusion4 MSC-L

Отзывы:

Похожие инструкции для Fusion4 MSC-L

Бренды по названию

Популярные бренды

Honeywell Fusion4 MSC-L, Руководство по установке и эксплуатации

Результаты поиска

Содержание Fusion4 MSC-L

Отзывы:

Похожие инструкции для Fusion4 MSC-L

Бренды по названию

Популярные бренды