58 Instruments and controls
A
B
C
A power socket is located in front
of the shift lever (A), on the rear of
the centre console (B) and on the
passenger side of the load area (C).
Connecting a device
1. Flip the socket cover open.
2. Follow the installation
instructions that are included with
the device.
3. Cover the socket with the
protective cap when not in use.
These circuits are protected by
a fuse and have a maximum
current load of 10 amps.
Caution
When using all accessory power
sockets, the total maximum
electrical load must not exceed
10 amps at 12 volts.
Always switch off any electrical
equipment when not in use.
Leaving electrical equipment on
for extended periods with the
engine off will drain the battery.
BOOK_MY14_CAPTIVA 7.indb 58
19/11/2013 2:56:54 PM
