228 Vehicle care
1
4
2
5
3
30. Tighten the nuts firmly with the
wrench in the pattern shown.
The required torque is 140 Nm
(Newton metres).
31. Position the jack under the spare
wheel carrier.
25. Remove any dirt or rust from the
wheel nuts and studs, mounting
surfaces and spare wheel.
26. Place the spare wheel on the
wheel mounting surface.
27. Replace the wheel nuts by hand
and lightly tighten with a wheel
wrench.
28. Turn the jack handle
anticlockwise to lower the
vehicle.
29. Remove the jack and wheel
wrench.
BOOK_MY14_CAPTIVA 7.indb 228
19/11/2013 2:57:15 PM