212 Vehicle care
7. Refit the lamp assembly into the
vehicle securing with the two
screws.
Rear tail lamp wattages:
• Reverse (16 W)
• Rear fog (21 W)
• Rear turn signal (21 W)
Licence plate lamps
(5 W)
1. Remove the two screws and the
lamp lens.
2. Rotate the bulb holder
anticlockwise and remove it from
the housing.
3. Pull the bulb straight out of
the bulb holder and install the
replacement bulb.
4. Rotate the bulb holder clockwise
to reinstall it into the lamp
housing.
5. Refit the lamp lens, securing with
the two screws.
Rear tail lamps
1. Open the tailgate.
2. Remove the two screws and the
lamp assembly.
3. Remove the bulb holder by
rotating it anticlockwise.
4. Push the bulb inward and rotate
it anticlockwise.
5. Insert the replacement bulb into
the holder and rotate it clockwise.
6. Replace the bulb holder into
the lamp housing and rotate it
clockwise to secure.
BOOK_MY14_CAPTIVA 7.indb 212
19/11/2013 2:57:13 PM
