Hokkaido HCND 261 G, Инструкция по эксплуатации

Страница: 7 / 104

IG-5
Monosplit “Wall” Personal Line Constant Speed - Section 1: General Information
Recapitulatory outline of main available functions on Units
Wide range of Error Codes that can be shown on bright
Display of Indoor Unit. “Self-Check” programme.
Indoor Units
ON/OFF by IR remote control
Indoor temperature sensor.
Indoor heat exchanger temperature sensor.
Monitoring of temperature values
Room temperature is kept on the basis of temperature value set by remote control, by thermostat under microcomputer
control.
Ambient temperature control
During starting phase in Heating mode, indoor fan will rotate at set speed after a delay of a few seconds.
Anti-cold drafts prevention function
Between each ON/OFF cycle of system and the following one, at least 3 minutes must elapse.
Protection against close ON/OFF
“HIGH” speed, “MED” speed, “LOW” speed, “BREEZE” speed.
Speed ranges of indoor fan
“Running” (Operation indicator), “
dF
” (the Defrosting is in progress. Indication on LED Display with 2 digits), “Timer”
(Indicator of starting up of Timer function, and corresponding remaining time), “
E_
” (Error Codes. Indication on LED
Display with 2 digits).
Logic control of horizontal air outlet flap
Control of indoor fan and of set temperature for reducing noise level
and electric power consumption.
“Sleep” function for reducing noise level
In environments with high humidity, this function allows to
restore quicklier your desired comfort conditions.
“DRY” function
Indications by D LED on frontal panel
Operation in Auto Mode
Simplified connections
Automatic defrosting
“TIMER On/Off” function
For preventing cold air supply during
starting in Heating mode.
“HOT- KEEP” function
Auto-Restart after a blackout
Autodiagnosis of malfunctions function
During starting phase, operation mode is automatically
selected according to indoor temperature conditions.
If you press “SWING” button on remote control to select
“natural flow”
mode, the horizontal air outlet flap on Indoor Unit
is controlled so as to simulate a light natural air inside the room.
Besides fixed stop positions, the automatic swinging of
air outlet flaps is also available.
Stop/swinging of air outlet flaps