Hokkaido HCND 261 G, Инструкция по эксплуатации

Страница: 22 / 104

IG-20
Monosplit “Wall” Personal Line Constant Speed - Section 1: General Information
Remote control’s
signal receiver
1
“Running” LED (Orange):
It lights up when the Indoor Unit is operating.
It flashes (once / 3seconds) when at operation start in Heating mode, the preheating of heat exchanger on
Indoor Unit is in progress (Indoor Unit’s fan is still stopped).
It flashes in different ways (see “Section 6: Diagnostic & Maintenance” of this Technical Manual) when a
system’s malfunction occurs.
LED Display with 2 alphanumeric characters (Orange):
During normal operation, it displays temperature value set by IR remote control.
If one of Timer options has been selected (“TIMER ON”, or “TIMER OFF”), the remaining time interval (in
hours) before automatic start/stop is displayed. The same remaining interval time is displayed on remote
control’s LCD Display.
While automatic defrosting is in progress (with reversal of refrigerant cycle as regards operation in Heating
mode), LED Display shows “ dF ” indication.
If control electronics diagnoses a malfunction which is in the list of codified malfunctions, LED Display shows
the corresponding Error Code [ E _ ]. For the list of Error Codes and malfunctions’ solutions, refer to “Section
6: Diagnostic & Maintenance” of this Technical Manual.
“Timer” LED (Orange):
It light up when one of Timer options has been selected (“Timer On”, or “Timer Off”).
3 2
“LED Display” function:
LED Display, always lighted up on these Models of Indoor Units “Constant Speed”, intensifies for
about 10 seconds each time a change of operation settings is carried out by IR remote control.
At the end of this time interval, the brightness of LED Display softens.
1.6 LED PANEL ON INDOOR UNITS