Hokkaido HCND 261 G, Инструкция по эксплуатации

Страница: 19 / 104

IG-17
Monosplit “Wall” Personal Line Constant Speed - Section 1: General Information
n
Outline of IR remote control’s buttons
Set Temperature
“ON/OFF” Button
“SWING” Button
“AIR FLOW” Button
“SLEEP” Button
“LAMP” Button
“HOLD” Button
Operation Mode
Fan Speed
“Turbo” Button
“Timer” Button
Reception of signals trasmitted to Indoor Unit
To start/stop the system.
To select operation in “SLEEP” mode.
To change fan speed:
• LOW:
• MED:
• HIGH:
• AUTO: (flashing).
MODE
FAN SPEED
TURBO
SWING
TIMER
HOLD
AIR FLOW
SLEEP
LAMP
These buttons allow to adjust
ambient temperature.
If you press “+” button, set
temperature is increased by 1°C.
If you press “-” button, set
temperature is reduced by 1°C.
The range of temperatures that
can be set is the following: 16°C ~
32°C.
(In “AUTO” mode and in “DRY”
mode, temp. is automatically set to
25°C and cannot be modified by
the User).
To select operation mode:
• “AUTO”
• “COOL”
• “DRY”
• “HEAT”
• “FAN”.
In COOL and HEAT modes, if you
press this button, operation in
“Turbo” mode is started up.
This function is not available on
these Models On-Off.
To programme the automatic start
(TIMER ON) or the automatic stop
(TIMER OFF) of system.
To select position of motorized
louvers for air outlet in horizontal
direction (left/right).
Flaps may swing continuously, or
stop in fixed position.
To light up/go out the Display on
the Indoor Unit.
This button is not operating on
these Models.
To lock/unlock all buttons of remote
control.
If buttons of remote control are pressed by orienting correctly remote
control itself towards the IR receiver on Indoor Unit, signals will be transmitted
to Indoor Unit.
If signals have been correctly received, the buzzer on Unit emits a sound.
+
-
•
“natural flow”
: (ON).
• Swinging: (flashing).
• Fixed position : (ON).
To adjust motorized flap for air
outlet
in vertical direction
(up/down):
In “DRY” mode, the flap’s angle is
adjusted in fixed position.