Hokkaido HCND 261 G, Инструкция по эксплуатации

Страница: 97 / 104

DM-12
Monosplit “Wall” Personal Line Constant Speed - Section 6: Diagnostic & Maintenance
Notes:
Cleaning of Indoor Unit and Remote Control
Outdoor Unit’s cleaning
NO!
Thinner
Sta
in
rem
ov
er
CAUTION
For cleaning of Indoor Unit and Remote Control, use a
soft and dry cloth, or a vacuum cleaner by adjusting it at
min. power.
If Indoor Unit is very dirty, use a cloth soaked in lukewarm
water (about 30°C) and neutral detergent.
Wash with clean water and dry well, as the presence of
humidity on Indoor Unit’s inlet grille may cause electric
shocks.
CAUTION
Never use water for cleaning inside parts. If water
enters inside, insulation system may be damaged, with
consequent risk of electric shocks.
NO!
For cleaning of Remote Control, never use clothes soaked
in water.
For cleaning of Units, never use petrol, thinner, polishing
powder or any similar solvents, etc.
In general, chemical products may crack or deform the
plastic and painted surfaces of Units.
For cleaning of Indoor Unit, do not use abrasive sponges, thus avoiding to scratch Indoor
Unit’s surfaces.
If Indoor Unit’s frontal panel is open or has been removed, do not touch aluminium fins of
heat exchanger, as fins’ profile is sharp.
Do not expose Indoor Unit‘s grille or the Indoor Unit itself to direct sunlight, to avoid
discolouring or deformation.
Check regularly that air inlet and outlet on Outdoor Unit are not obstructed by dust or any other
impurites.
Any extraordinary cleaning or maintenance intervention on Outdoor Unit, must be always carried
out by Authorized Technical Service.
Before beginning cleaning operations:
1.
Stop system by pressing ON/OFF button on remote control.
2.
Move main power switch on “OFF” or “0”.
3.
Pull out the plug from power socket.
4.
To reach Indoor Unit, use a stepladder of other appropriate bearing strong enough to ensure
your safety.