Hokkaido HCND 261 G, Инструкция по эксплуатации

Страница: 29 / 104

IG-27
Monosplit “Wall” Personal Line Constant Speed - Section 1: General Information
Clean the filters on Indoor Unit
Adjust temperature in a correct way
Insulate the room from outside
Screen the windows
Use TIMER in a correct way
TIMER
In Cooling mode
Direct airflow in a suitable way
Too cold!
1.11 SUGGESTIONS FOR ECONOMIC USE OF SYSTEM
n
Set a suitable temperature value:
¦
During operation in Heating mode, avoid to set a
too high temperature value.
¦
During operation in Cooling mode, avoid to set a
too low temperature value.
n
Often clean air filters:
¦
To keep air conditioner in perfect efficiency, it is
necessary to clean filters on Indoor Unit at least every
2 weeks, as it is described in the “User Manual” of
these systems.
¦
If there is a lot of dust on filters, the system’s
performances will be reduced.
n
Avoid to keep door and windows always open:
¦
This reduces the system’s performances and causes
an increase in electric power consumption.
¦
Moreover, in case of thermic overload, it may occur
the intervention of protective automatic functions of
appliance, with consequent stop of system itself.
n
Limit exposure to sunlight:
¦
During operation in Cooling mode, it is recommended
to screen by curtains the windows exposed to sunlight
during the warmest hours of day.
¦
In this way, you will experience substantial
increase in comfort and a reduction in power supply
consumption.
n
Use “TIMER” function according to real needs:
¦
Do not programme operation for time intervals
longer than real comfort needs, by considering above
all the real stay of people in the air-conditioned room.
n
Adjust the airflow direction:
¦
With some practice, it will be possible to evaluate
by yourself the increase in comfort that results from
a correct adjustment of airflow direction. In this way,
electric power consumption being equal, comfort
remarkably increases.