DM-13
Monosplit “Wall” Personal Line Constant Speed - Section 6: Diagnostic & Maintenance
Air inlet and outlet must be free from obstacles
Fixing devices on Units must allow a safety operation
Carry out this check both on Indoor Unit and on Outdoor Unit.
Fixing devices may be subject to corrosion and must be checked regularly to prevent any
possible collapse of Units.
1.
2.
Grounding Wires
Grounding wires must be carried out professionally.
This is essential for correct operation of system and for Safety.
In case of incorrect Grounding wires, there is the risk of electric shocks
3.
Air filters on Indoor Unit
If air filters have been removed or are damaged, reinstall them and eventually replace
them. Filters must be cleaned at the beginning of each season.
4.
Ordinary maintenance: at the beginning of season
CAUTION
Batteries of IR remote control
Batteries that are previously removed must be
fitted again into remote control after checking
they are charged.
5.
Power supply of system
6.
Supply power to the system a few hours before
starting it, by inserting the plug into the power
socket and moving main switch to “ON” or “I”.
At the end of this time, it is possible to start
system’s operation by pressing ON/OFF button on
remote control.
At the beginning of each season or after a long period during which the system has not been
used, carry out the following checks:
Содержание HCND 261 G
Страница 100: ...Notes 1 Monosplit Wall Personal Line Constant Speed Notes Notes ...
Страница 101: ...Notes 2 Monosplit Wall Personal Line Constant Speed Notes Notes ...
Страница 102: ...Notes 3 Monosplit Wall Personal Line Constant Speed Notes Notes ...
Страница 103: ...Notes 4 Monosplit Wall Personal Line Constant Speed Notes Notes ...