Hokkaido HCND 261 G, Инструкция по эксплуатации

Страница: 25 / 104

IG-23
Monosplit “Wall” Personal Line Constant Speed - Section 1: General Information
Airflow supply in horizontal direction can be adjusted by IR remote control, through “AIR FLOW”
button.
Vertical louver for adjusting airflow in
horizontal direction.
Continuous swinging of louver
Adjusting airflow in horizontal direction:
Carr y out this adjustment when the system is
operating.
Press “AIR FLOW” button on remote control to
select horizontal direction (left/right) for airflow
supply.
On IR remote control’s display display may appear
the following indications:
Flashing indicator.
Automatic swinging of air outlet vertical
louver has been set.
FIxed indicator.
A fixed position for air outlet vertical louver
has been set.
Note:
The adjustment of airflow in horizontal direction is
available in all operation modes of system.
CAUTION
When the system is OFF, “AIR FLOW” button does not start any function.
Never try to move vertical louver manually, but adjust it by using remote control only. In this way,
Adjstment mechanism will not be damaged.
n
Adjustment of airflow in horizontal direction
to air outlet max. angle, and in Cooling mode, select “High” fan speed.
¦
When system is connected, each flap motor may emit a light whirr for about 10 seconds, however
this is not a malfunction.
¦
Never try to move horizontal flap manually, but adjust it by using remote control only. In this way,
adjustment mechanism will not be damaged.