Hokkaido HCND 261 G, Инструкция по эксплуатации

Страница: 20 / 104

IG-18
Monosplit “Wall” Personal Line Constant Speed - Section 1: General Information
n
Outline of symboles on IR remote control’s Display
TEMPERATURE
This indicator shows set temperature.
Range of temperature that can be
set is the following: 16°C ~ 32°C.
(In AUTO and DRY modes,
temperature is automatically set to
25°C and it cannot be adjusted by
the User).
Automatic Mode
Cooling Mode
Drying Mode
Heating Mode
Fan only Mode
“SWING” Indicator
TIMER
It indicates TIMER setting.
“SLEEP” Indicator
“TURBO” Indicator
“KEY LOCK” Indicator
“FAN SPEED” Indicator
“AIR FLOW” Indicator
Notes:
The Figure above shows all possible indications that can be displayed on IR remote control’s
Display.
In reality, only indications referred to current operation selections will be displayed.
This symbol indicates that “AUTO”
Mode has been selected.
This symbol indicates that “COOL”
Mode has been selected.
This symbol indicates that “DRY”
Mode has been selected.
This symbol indicates that “HEAT”
Mode has been selected.
This symbol indicates that “FAN”
Mode has been selected.
It indicates that “SLEEP” mode has
been selected.
In COOL and HEAT modes, this
indicator lights up if “TURBO”
mode has been selected.
This function is not available on
these Models On-Off.
This indicator is displayed if remote
control’s buttons have been locked.
It indicates current setting of fan
speed:
• LOW:
• MED:
• HIGH:
• AUTO: (flashing).
It indicates current setting of
motorized louvers for horizontal
adjustment (right/left) of air outlet:
• Automatic swinging: (flashing).
• Fixed angle: .
• “natural flow” : (ON).
• Swinging: (flashing).
• Fixed position: (ON).
It indicates the setting of motorized
flap for air outlet in vertical direction
(up/down):
In “DRY” mode, the angle of flap is
adjusted in fixed position by control
electronics.