background image

 

Installation of roof air conditioning 

system Easy Cool EC-2500 or EC-3000 

on display stand 

PB4 

Pom/Fh 

Page 1/4 

 

22.10.03 Display EC

2500/3000 

4445100

103

 

   

 

 

 

Illustration 1: 

¾

  The installated roof air conditioning 

system on display stand contains: 

  a display stand with support holder

  a roof air conditioning system EC-

2500 or EC-3000 with fixing frame 

  an air outlet unit  

  a remote control with holder 

 

Illustration 2:  

¾

  Attach the support holder to the display 

stand. 

¾

  Fasten the holder on the side and on top 

with the supplied round head bolts (4xM8).

Illustration 3: 

   Caution! 

Danger of finger clamping! 

¾

  Put the system fittingly on the stand! 

Содержание Easy Cool EC-2500

Страница 1: ...em on display stand contains a display stand with support holder a roof air conditioning system EC 2500 or EC 3000 with fixing frame an air outlet unit a remote control with holder Illustration 2 Attach the support holder to the display stand Fasten the holder on the side and on top with the supplied round head bolts 4xM8 Illustration 3 Caution Danger of finger clamping Put the system fittingly on...

Страница 2: ...tion 4 Fasten the fixing frame with key screws 4xM8 from below Illustration 5 Insert the mains cable 230V into the borings from above Pull the mains cable out below the stand Illustration 6 The condenser outlets are both on the left and the right side Drill the condener outlets to a diameter of 8 mm Stick in the corrugated hoses There are 2 hoses on each side ...

Страница 3: ...and from below and push through to the top Attach the lower end to the condensator container Illustration 8 Connect the other end of the long corrugated hose to the two short corrugated hoses with T fitting This must be made on both sides Illustration 9 Shorten the connection connection shaft for about 70 mm Caution Do not shorten the side of the connection shaft which is pushed on the suction ope...

Страница 4: ...3000 4445100103 Illustration 10 Connect the 8 pole connector of the connecting line from the system to the air outlet socket Illustration 11 Fasten the air outlet unit with the suppllied self tapping screws 8 screws to the fixing frame Illustration 12 Fasten the holder of the remote control to the intended borings on the display stand ...

Отзывы: