Hioki MR8740-50, Инструкция по эксплуатации

Страница: 54 / 238

48
Configuring Measuring-Module-Specific Settings
4
Click the [Burn out] box, and then choose between [On] and [Off] from the list for the wire
break detection setting.
You can detect a broken thermocouple wire during temperature measurement. If a thermocouple wire breaks,
measured values will fluctuate.
Off  Does not check wires for a break.
On
Check wires for a break by flowing about a minuscule current of 100 nA through the
thermocouple.
If the thermocouple wires are long or have a relatively high resistance, set [Burn out] to [Off] to avoid
measurement errors.
5
Click the [Data update] box, and then choose a data update interval from the list.
Fast Updates data about every 1.2 ms.
Choose this option for a quicker response. However, choosing this option causes some
increase in noise superimposed on input signals.
Normal  Updates data about every 100 ms.
Choosing this option eliminates noise, leading to stable measurement.
Slow Updates data about every 500 ms.
Choosing this option leads to stabler measurement.
6
Click [Close] .
The setting dialog box closes.