Hioki MR8740-50, Инструкция по эксплуатации

Страница: 179 / 238

173
9
Memory Dividing Function
You can divide the memory capacity into several blocks, each of which is used to store waveforms.
> [Status] > [Condition]
Operation available with the memory dividing function
• You can divide the memory capacity into several blocks and save waveforms onto any blocks.
• When triggered, the instrument starts to sequentially acquire waveform data and store the data
onto the block you specified (start block).
During use of the memory division, the instrument may switch the trigger output (TRIG_OUT
terminal) to a low level or irregularly output signals.
• The trigger output method is set to pulse.
• Recording (measuring) length: 5 ms or less
• You can divide a memory into up to 1024 blocks.
• You cannot use the real-time save function concurrently with the memory division function.
Refer
to “Real-time save” (p. 88).
9 Memory Dividing Function
9
Memory Dividing Function