Hioki MR8740-50, Инструкция по эксплуатации

Страница: 77 / 238

71
Configuring Generator-Module-Specific Settings
Pattern reproducing frequency
Enter a clock frequency of pulse pattern. (In 10 Hz increments)
• Settable clock period range: 0 to 0.1 seconds
• You can freely specify the clock cycle as long as it falls into the above-mentioned range. The cycle of the
actually outputted waveform becomes the nearest value among the reciprocals of settable frequencies.
0 Hz to 120000 Hz
Output configuration
Choose an output status.
• The ground potential is cross-channel and not insulated.
TTL  TTL-level output (amplitude: 0-5 V)
OC Open-collector output
With the open-collector output setting
• Limit the collector-emitter voltage to 50 V.
• Output signals require a response time of about 5 µs or less to rise from 10% to 90%. (With a load capacity
of 1000 pF and a pull-up resistance of 1 k
Ω
, values for reference purposes)
Output
Switch waveform output settings.
The instrument may momentary output a high-level signal at the times of power-on and power-off.
OFF
 Does not output a waveform
ON Outputs a waveform
Confirmation of the setting
After finishing the setting, click [Send setting] .
The instrument confirms the settings and outputs a waveform.
3
Advanced Functions