Hioki MR8740-50, Инструкция по эксплуатации

Страница: 184 / 238

178
4
Click the [Grid] button to choose a grid display setting of the waveform screen.
On  Displays the solid-line grid.
Off Does not display any grids.
5
Click the [Waveform screen background color] box, and then from the list, choose a
background color of the waveform screen.
Some background colors of waveforms may cause waveforms to get difficult to see. Change the waveform
colors in such a case.
Black
 Sets the background color of the waveform screen to black.
White Sets the background color of the waveform screen to white.
6
Click the [Zero position] button to set it to [On] or [Off] .
You can display markers at the zero position of each input channel on the time-axis waveform display.
Off  Does not display any markers.
On Displays markers at the zero position on the right side of the waveform screen.
7
Click the [ Beep sound] box, and then choose a beep setting from the list.
Off
Does not allow the instrument to beep.
Alert  Allows the instrument to beep in the following cases:
• If an error message or warning appears
• If a fail judgment is given
Alert+Action Allows the instrument to beep when the instrument starts a measurement, is triggered,
stops the measurement, and completes auto-saving, in addition to the cases described
above.
8
Click the [Restart] box, and then from the list, choose whether to immediately restart the
measurement after changing a setting that affects measurement during the measurement.
No Does not restart any measurement.
You cannot change any settings during measurement.
Yes  If you change a setting during measurement, the instrument confirms the changes and
then restart the measurement.
9
Click the [Time value display] box, and then from the list, choose a display format for the
lapse time from a trigger point.
Time  Displays the lapse time from the trigger point (the unit is fixed).
Mod 60 Displays the lapse time from the trigger point (in the sexagesimal [base 60] system).
Date Displays the time when the instrument acquired a waveform.
Samples Displays the number of data points acquired during the period from the trigger point.
• During the external sampling is used, this setting is fixed to
[Samples]
.
• These settings are also applied to the values of the trace cursors.