Hioki MR8740-50, Инструкция по эксплуатации

Страница: 92 / 238

86
Saving Data
(When you choose
[Waveform (Text)]
in the
[Type]
box)
Click the [Thin out] button to set it to [On] or [Off] .
When you choose [On] , click the number box on the right, and then enter the number of data points out of
which a data point is retained.
Storing files in text format requires a lot of storage space. Data decimation can reduce file sizes.
Off

No data is decimated.
On ( 2 to 1,000 ) Allows you to enter the decimation number. The instrument retains one data point out
of the specified number of data points.
Example
When you enter
[3]
, the instrument retains one data point out of three consecutive data points: it decimates
the two other points.
The number of data points is reduced by one third of the original number.
5
In the [Calculation result] area, click [On] or [Off] to configure the saving setting of the
numerical calculation result .
Off  Does not save any numerical calculation results.
On Saves numerical calculation results.
Click the [File] box, and then from the list, choose an option for saving data to files.
New  Creates a new file for each measurement and saves it.
Append Appends data to an existing file and saves it.
Click the [Divide] box, and then choose a file division setting from the list.
Off  Does not divide any files.
Split by Calc. No. Creates a file for each calculation number.
6
In the [ Screen image] area, click [On] or [Off] to configure the saving setting of display
images.
Off  Does not save any screenshot.
On
Saves a screenshot.
Click the [Type] box, and then choose a save format of images from the list.
BMP  , PNG , JPEG
When you choose data in text format or numerical calculation results to be saved
Characters or display items used on the instrument are converted as follows:
Character
used on the
instrument
Saved
character
2
^2
3
^3
μ
~
u
Ω ~
o
e
~
e
°
~
c
±
~
+