Hioki MR8740-50, Инструкция по эксплуатации

Страница: 90 / 238

84
Saving Data
Automatically saving waveform data
The instrument automatically saves data every time it has acquired the measured data with the
recording length. Specify a save destination and items to be saved before starting a measurement.
> [Status] > [Save]
1
2
3
4
5
6
2
-(1)
2
-(2)
1
Click the [Auto save settings] button to set it to [On] .
2
Click the [Media] box, and then choose a destination to save from the list.
SSD/HDD  Built-in SSD
USB flash drive USB flash drive
Mail Sends measured data to a computer in the network or to a remote computer as an
email attachment.
FTP transfer: Sends waveform data to a computer connected to your network.
(1) When you choose a save destination, the state of the storage device such as its drive letter and capacity
appears on the right of the [Media] box. If no storage device is inserted, the string [None] appears.
(2) When you choose [USB Memory] as the save destination, choose a USB flash drive you would like to use
as a save destination from among all attached USB flash drives.
• The [HIOKI_MR8740T] folder is automatically created in the specified save destination, and sub-folders are
automatically created in the folder according to the [Type] setting.
Waveform (Binary), Waveform (Text), Waveform (Float): WAVE
Setting: CONFIG
Numerical calculation result: MEASURE
Screenshot: PICT
When you choose [FTP] , configure the LAN and FTP client function settings.
Refer to “Configuring the LAN settings with the instrument” (p. 182) and “11.3 Sending Data to a Computer
With the FTP Client Function” (p. 192).
• Use Model Z4006 USB Drive (Hioki’s option) for protecting data.
3
Enter the file name in the [File name] box.
• Number of characters for a file name: Up to 100 characters
• The maximum length of a file name that includes its path: Up to 255 characters