Hioki MR8740-50, Инструкция по эксплуатации

Страница: 44 / 238

38
Converting Input Values (Scaling Function)
3.2 Converting Input Values (Scaling Function)
About the scaling function
The scaling function enables you to convert voltage outputted from measuring devices such as
sensors into physical quantities of measuring objects.
Hereafter, the term “scale” refers to converting numerical values using the scaling function.
Gauge scales, scaled values (upper and lower limits of the vertical axis or voltage axis), and
measured values using trace cursors are represented as scaled values in the specified units.
You can configure different scale settings for each channel.
Before scaled After scaled
[V]
0
0.1
0.2
[A]
0
5.0
10
Scaling methods
The following six methods are available:
• Specifying a conversion ratio and offset
• Specifying two points
• Choosing a model name of a connected current sensor or differential probe
• Choosing an output rate
• Specifying an input value in decibels and value after scaled
• Specifying a rated capacity and rated output according to an inspection record of a strain gauge
converter (for Model U8969 Strain Unit only)
> [Channel]
3
4
1
2