Hioki MR8740-50, Инструкция по эксплуатации

Страница: 95 / 238

89
Saving Data
> [Status] > [Save]
2
3
4
5
1
Configure the real-time save and sampling rate settings on the [Condition] screen
Refer to “1.2 Setting Measurement Conditions” (p. 5).
2
Click the [Media] box, and then choose a destination to save from the list.
3
Click the [Recording time] box, and then enter a recording time.
d
0 to 10000 (days)
h 0 to 23 (hours)
min 0 to 59 (minutes)
s 0 to 59 (seconds)
4
Click the [Method] box, and then from the list, choose a saving way if a space of a storage
device is insufficient.
Normal
 Stops the real-time save and measurement if the storage device is full.
Delete Deletes older files and saves files in real time if the storage device is full (waveform
files only).
The instrument deletes files only created after the measurement has started. It does
not delete previously existing files.
Setting [Media] to [FTP] forces this setting into [Normal] .
5
Click the [Channel] box, and then choose an option for channels to be recorded.
Display The instrument records data acquired across channels with the waveform display set
to [On] .
All

Records data acquired across all measured channels. The instrument also records
data acquired across channels with the waveform display set to [Off] .
6
Check settings that include the input channel settings, and then click the start icon.
The instrument saves data onto a storage device in real time during measurement.
4
Saving/Loading Data and Managing Files