Hioki MR8740-50, Инструкция по эксплуатации

Страница: 155 / 238

149
Evaluating Calculation Results on a Pass/Fail Basis
> [Calculation] > [Numerical calculation]
4
1
2
3
1
Click the [Judge stop condition] box, and then from the list, choose a stopping condition
applied according to judgments.
PASS Stops measurement when a calculation result falls within a criteria range (pass
judgment).
FAIL Stops measurement when a calculation result is outside a criteria range (fail judgment).
PASS & FAIL  Stops measurement regardless whether a pass or fail judgment is given.
2
Click the [Judge] box, and then from the list, choose whether or not to evaluate calculation
results.
Off  Evaluates calculation results.
On
Yields a fail judgment if a result is outside a criteria range.
Calculated values in a channel with the fail judgment are highlighted in red.
3
Click the [Up] and [Low] boxes in turn, and then enter evaluation criteria values in each of
them.
Enterable range: −9.9999E+29 to −1.0000E29, 0, +1.0000E29 to +9.9999E-29
(To evaluate existing data)
Click
[Execute]
.
(To automatically execute evaluation after measurement)
Click the start icon.
About upper and lower limit values
You cannot specify an upper limit value lower than a lower limit value.
Neither can you specify a lower limit value higher than a upper limit value.
To record all calculation results
Choose [PASS & FAIL] for the stopping condition.
7
Numerical Calculation Function