Hioki MR8740-50, Инструкция по эксплуатации

Страница: 51 / 238

45
Copying Settings (Copy Function)
3.5 Copying Settings (Copy Function)
You can copy settings of other channels, as well as the trigger settings.
The following procedure explains how to copy settings of another channel.
> [Func] > [Copy] > [Channel]
3
2 1
4
1
In the [Contents] area, click one or more of items that you want to copy.
Depending on module types, some items may not be able to be copied.
Basic Copies the mode, measurement range, coupling, L.P.F., division ratio, and module-
specific settings.
Display Copies the display setting (excluding comments).
Comment Copies a comment.
Scaling Copies the scaling setting.
2
Click the [Source] box, and then choose a source channel from the list.
3
Click the [Destination] box, and then choose a destination channel from the list.
Otherwise, click [All] .
CH1-1 
(Channel
selection)
Click this option when you would like to copy the settings to any one of the channels.
Select a destination channel from the list.
All Copies settings to all channels of UNIT 1 through UNIT 27.
4
Click [Copy] .
After copying the settings, check that levels and setting values, which includes upper and lower values, and
the measurement range are appropriately set.
3
Advanced Functions