Haemonetics PCS 2, Руководство пользователя

Страница: 64 / 134

5-4 PCS2 Service Manual
9. Press the STOP key again to exit Configuration. Toggle the write
protect switch on the Processor Card when instructed and replace the
rear panel.
10.Exit Utilities by pressing the STOP key.
Serial Number Configuration
1. Power on the PCS2 in the Utilities mode of operation by pressing and
holding the PLASMA key while switching the power on. Hold the
PLASMA key until the Utilities menu appears on the display.
2. Select Configuration on the Utilities menu by pressing the MODIFY
PROGRAM key until the arrow points to Configuration, then press
the DRAW key. Toggle the write protect switch on the Processor Card
when instructed. (Remove rear access panel.)
3. Press the MODIFY PROGRAM key until the arrow points to Serial #.
4. Select Serial # by pressing the DRAW key.
The following graphic represents the Serial # screen:
MACHINE SERIAL #
Machine SERIAL # 00A000
^
5. Use the “YES” and “NO” keys to change the digit or character
selected, as indicated by the “^” cursor. Use the “MODIFY” key to
advance the cursor to the next digit/character. Change all digits or
characters until the display serial number matches the machine serial.
6. Press the STOP key to exit Serial # Configuration.
7. Press the STOP key again to exit Configuration. Toggle the write
protect switch on the Processor Card when instructed and replace the
rear panel.
8. Exit Utilities by pressing the STOP key.
Collection Weight Configuration
1. Power on the PCS2 in the Utilities mode of operation by pressing and
holding the PLASMA key while switching the power on. Hold the
PLASMA key until the Utilities menu appears on the display.
2. Select Configuration on the Utilities menu by pressing the MODIFY
PROGRAM key until the arrow points to Configuration, then press
the DRAW key. Toggle the write protect switch on the Processor Card
when instructed. (Remove rear access panel.)