90
In
tr
oduc
tion
Pr
oduc
t Description
Instruc
tions f
or use
Technica
l Inf
ormation
Insta
llation
Main
tenance
Spar
e P
ar
ts
Appendix
Con
ten
ts
Declar
ation
Oper
ation & Main
tenance Manual SpeedStile B
P DS
Setting to Work
n
ote
-t
he
S
peed
S
tIle
Bp dS
caBInet
IS
generally
SupplIed
aSSemBled
,
and
only
requIreS
to
Be
anchored
to
the
floor
. I
n
SpecIal
caSeS
the
S
Ide
a
cceSS
p
anelS
are
to
Be
fItted
after
the
InStallatIon
.
This is of maximum importance for the system to operate properly
•
Mark the position of the fixing holes on the floor.
•
Move the units and drill the anchor fixing holes to the floor.
•
Re-position the units and anchor them to the floor by means of the anchor fixings.
•
Make sure that the frame is perfectly level, checking in transverse and longitudinal
direction, use shims and all other necessary measures to obtain the required result.
•
As the panel slides in the opening slot it must be central within the slot.
•
The panel must be perpendicular to the casework.
•
In the open position the edge of the panel must be parallel with the casework.
When the door is mounted, the mechanism position must be regulated so that the following
conditions are established:
•
The glass door within the passageway must always be equal distance from the
edge (about 4mm).
•
The door must be at right angles to the cabinet.
•
When open, the edges of the door must be parallel to the plane of the cabinet.
•
The door must open and close by operating the limit switches without touching
the cabinet casing.
In order to effect these operations the screws anchoring the mechanism to the frame and the
top supporting element must be loosened, then tune the grub screws on the support; then check
that all screws are tightened.
•
Finally, check the correct movement of the mechanism.
Mechanism coming into contact with any parts of the case-work
To make the necessary adjustments, loosen the screws that attach the mechanism to the frame
and to the upper fixing bracket and adjust the grub screw in the support.
When the ideal position is obtained, tighten all the previously loosened screws.
Содержание SpeedStile BP DS Standard Lane
Страница 1: ...S P E E D S T I L E BP DS series Operation Maintenance Manual...
Страница 2: ......
