Gunnebo SpeedStile BP DS Standard Lane, Руководство по эксплуатации и техническому обслуживанию

Страница: 35 / 133

35
Appendix
Declar
ation
Spar
e P
ar
ts
Main
tenance
Insta
llation
Technica
l Inf
ormation
Instruc
tions f
or use
pr
oduc
t Description
In
tr
oduc
tion
Con
ten
ts
Oper
ation & Main
tenance Manual SpeedStile B
P DS
Table For Hold Open/Close
MBO1 M5 - M4 Hold Open / Close
Pin M5 Terminal M4 terminal
Connection
details
1 Hold Open + +24Vdc Users control
2 GND GND Linked pins
3 Hold Close - -24Vdc Users control
4 GND GND Linked pins
Validation
In this case, the user must validate within a time out period that depends on which corridor
zone is engaged.
In the picture below, an example of the zones pattern is given in A direction. The same for B
direction must be considered. The parameter “Access Level” defines all the possible configurations
for Zone 1 and Zone 2 for the Short or Long Cabinet depending on what has been selected. This
parameter adjusts the transit velocity of the passengers.
There are two time-outs, one for the Zone 1 and one for the Zone 2. The time-out for Zone 1 is
higher than Zone 2.
The tailgating alarm only uses the sensors configured in Zone 2.
Examples: - If the parameter “Access Level” is equal to the first sensor after the doors,
only the Zone 1 is active and the tailgating alarms are disabled; anyway the
intrusion alarms are enabled.
- if “Access Level” is equal to 1, the passenger must validate before entering into
Zone 2 and the tailgating alarms are enabled; the passenger flow rate is slower.
- if “Access Level” is equal to 7 for the long cabinet, the passenger must validate
before going past the doors; the TAILGATING is detected only when the passenger
is beyond the doors; the passenger flow is higher.
• Main-menu/Setup/Fraud/Access Level