Gunnebo SpeedStile BP DS Standard Lane, Руководство по эксплуатации и техническому обслуживанию

Страница: 59 / 133

59
Appendix
Declar
ation
Spar
e P
ar
ts
Main
tenance
Insta
llation
Technica
l Inf
ormation
Instruc
tions f
or use
pr
oduc
t Description
In
tr
oduc
tion
Con
ten
ts
Oper
ation & Main
tenance Manual SpeedStile B
P DS
MB01 Messages and LEDs
The MB01 logic signals is operating status by means of the LEDs and the 7 segment display
mounted on board.
a: Door in target position
b: Opening command is being executed
c:
Zero setting cycle has not been executed
d: Safety zone engaged during zero setting cycle
e:
Detected obstacle
f: Closing command is being executed
g Safety sensors engaged
d.p.: Active CAN connection
Examples:
Display Meaning
The MB01 is ready to work and the CAN bus connection is active.
The MB01 is executing an open command.
The MB01 is executing a close command.
The closing movement is stopped by the safety sensor activation
or
An obstacle is detected during the closing movement; after a
second appears:
the MB01 is executing the zero setting cycle.
The zero setting cycle execution is stopped because the safety
zone is engaged.
The safety zone is engaged.
The MB01 has not executed the zero setting cycle.
appears at the start-up or the hard reset or exiting from
maintenance operation.