Gunnebo SpeedStile BP DS Standard Lane, Руководство по эксплуатации и техническому обслуживанию

Страница: 27 / 133

27
Appendix
Declar
ation
Spar
e P
ar
ts
Main
tenance
Insta
llation
Technica
l Inf
ormation
Instruc
tions f
or use
pr
oduc
t Description
In
tr
oduc
tion
Con
ten
ts
Oper
ation & Main
tenance Manual SpeedStile B
P DS
Fig 4.3 – MB01 Board Layout
MB01 Trimmers
The MB01 board has six trimmers (see Figure 4.3) which allow the tuning of the door
movement. Each trimmer has six snap positions (0-5).
Trimmer Description
TR1 Running mode selection
TR2 Closing speed (5 = max speed)
TR3 Opening speed (5 = max speed)
TR4 Obstacle detection sensitivity (0 = max sensitivity)
TR5
Close position offset (5=highest distance from end
run
TR6
Open position offset (5=highest distance from end
run)
The MB01 board takes into account any changes of the trimmers position at the start up or in
MB01 maintenance mode (see below in this manual).
In MB01 maintenance mode the trimmers can be changed and the effect can be tested (See
Below).
n
ote
-I
f the trImmer
’
S poSItIon IS changed
,
Before exItIng from the maIntenance operatIng mode
,
launch the learnIng cycle
.
a
nytIme the poSItIon IS changed a
r
eSet IS requIred So that the modIfIcatIon wIll take effect
.