Gunnebo SpeedStile BP DS Standard Lane, Руководство по эксплуатации и техническому обслуживанию

Страница: 70 / 133

70
In
tr
oduc
tion
Pr
oduc
t Description
Instruc
tions f
or use
Technica
l Inf
ormation
Insta
llation
Main
tenance
Spar
e P
ar
ts
Appendix
Con
ten
ts
Declar
ation
Oper
ation & Main
tenance Manual SpeedStile B
P DS
Each menu may contain sub menus. Follow the same logic to navigate through the menus and
sub menus:
ENTER to access the sub menu, ESC to exit to the higher level menu.
Versions Menu
Path: Main menu / Version
The display shows the codes of the firmware currently loaded into the GC01 and MB01 boards.
The message starts with ‘CB’ for the GC01; starts with ‘MS’ or ‘SL’ respectively for the master or
slave MB01.
View Aisle Utility
Path: Main menu / View aisle
On the display a real time view shows the status of each sensor either (engaged/free).
In this mode, the gate works in normal operation.
If no sensors are engaged, the display shows see below:
0 0 < 0 0
0 0
SW1
SW2 SW3
RESET
If for example, on the short cabinet version, sensor 4 is engaged:
0 * < 0 0
0 0
SW1
SW2 SW3
RESET
Out of Service LCD messages
The fault message starts with ‘CB’ if the error is reported by the GC01; starts with ‘MS’ or ‘SL’
respectively it is reported by either MB01.
In the case of a ‘warning’ message, the gate continues to work normally. In the case of a locking
error/fault, the logic puts the gate into the out of service mode