Gunnebo SpeedStile BP DS Standard Lane, Руководство по эксплуатации и техническому обслуживанию

Страница: 48 / 133

48
In
tr
oduc
tion
Pr
oduc
t Description
Instruc
tions f
or use
Technica
l Inf
ormation
Insta
llation
Main
tenance
Spar
e P
ar
ts
Appendix
Con
ten
ts
Declar
ation
Oper
ation & Main
tenance Manual SpeedStile B
P DS
Transit Authorisation for User with Limited Mobility
A specific input is available for each direction to allow the transit of a passenger in a wheelchair.
This input works like the reader permission input but, when it is activated, the gate logic configures
all time-outs and parameters for that kind of transit managing.
If both kind of reader permission inputs are used and both authorization types are accumulating
in memory, the logic will process all of them as for user in a wheelchair.
Authorisation Memory
If the reader authorisation is set on “unlock on front” the logic system memorises the
authorisation signals which arrives while the passageway is still executing transit.
The maximum number of authorisations that can be memorised is determined by the value
of two programmable parameters, one for each direction (see “Reader Group” in the annex
“Parameter Table”).
If the authorization memory is full, the logic ignores other authorizations until one of the
memorised transit is processed.
Fraud Alarms Selectivity
Introduction
To recognise the fraud attempt, the passageway logic system uses various detection algorithms.
Each of them can be separately activated or de-activated with the programmable parameters of the
“Fraud Group” (see the annex “Parameter Table”).
• Tail gating scenarios.
• Intrusion scenarios.
• Wrong way scenarios.
The user can select the level of sensitivity making the gate more or less sensitive to the fraud
conditions. The user can only adapt each algorithm to conform to a particular scenario.
The parameter “Access Level” defines the Fraud Alarm Selectivity (see “Fraud Group” in the
annex “Parameter Table”).
• Main-menu/Setup/Fraud/Access Level
During the alarm conditions on the GC01 circuit board screen a message appears and
corresponding message is transmitted via serial line.
F R A U D C O N D I T I O N
T I W L
SW1
SW2 SW3
RESET