Gunnebo SpeedStile BP DS Standard Lane, Руководство по эксплуатации и техническому обслуживанию

Страница: 97 / 133

97
Appendix
Declar
ation
Spar
e P
ar
ts
Main
tenance
Insta
llation
Technica
l Inf
ormation
Instruc
tions f
or use
pr
oduc
t Description
In
tr
oduc
tion
Con
ten
ts
Oper
ation & Main
tenance Manual SpeedStile B
P DS
Section 6
Maintenance
General Care
Access to the electrical installation is strictly reserved to maintenance technicians authorized by
Gunnebo Entrance Control.
a
ll the maIntenance procedureS muSt Be carrIed out wIth the maIn SwItch at the
"0"
poSItIon
,
unleSS otherwISe IndIcated
.
! e
ven If the maIn SwItch IS
“
open
” (0
poSItIon
),
the power Supply caBle and the termInal Before the
maIn SwItch are under voltage
(230v
ac
)!
A mains isolation switch (3mm minimum disconnection distance) must be provided before the
SpeedStile BP DS . This switch must be key lockable in order to protect the maintenance engineer
during the maintenance.
The SpeedStile BP DS should be cleaned and greased at regular intervals, using the following
approved materials.
Routine cleaning, all finishes
Cleaning agent: Soap or mild detergent water.
Action: Sponge rinse with clean water, wipe dry as neces-sary.
Stubborn stains and discolouration, all finishes
Cleaning agent: Mild cleaning solutions or domestic service cleaners
Actions: Rinse well with clean water and wipe dry.
Oil, Grease marks, all finishes
Cleaning agent: Organic solvents (acetone, alcohol, genclene, tri-
chlorethane).
Action: Clean after with soap and water, rinse well with clean
water and wipe dry.
Rust and other Corrosion products, Stainless finishes
Cleaning agent: Oxalic acid. The cleaning solution should be applied
with a swab and allowed to stand for 15 to 20 minutes
before being washed away with water. May continue
using a domestic surface cleaner to give final
clean.
Action: Rinse well with clean water (precautions for acid
cleaners should be observed).