GSK928TE
Ⅱ
Turning CNC System User Manual
53
the cursor points to Scale .
The scale is defined by the system: 4:1, 3:1, 2:1, 1:1, 1:2, 1:3 and 1:4. User can select the
proper scale to realize the best view effect.
After rewriting the data, press
to return to
AUTO
mode, the system updates the
displaying range of blank according to the set display data in the graphics display mode.
When the set display data exceeds the screen displaying range, the system prompts Out Of
Graph, and the display data must be rewritten again.
Note 1:
The starting point of tool must be out of the blank displaying range, otherwise the
machining process cannot be displayed exactly
.
Note 2:
After s
witching from the graphics display to the coordinate display in the course of
machining, the displaying is not the previous machining path but the next machining one.
Switch to the planar solid display in the course of the program running, the workpiece
shape may not be displayed normally until the next cycle is executed.
4.5.4 Manual Operation of Auxiliary Function
In
AUTO
mode, the auxiliary functions such as spindle control, cooling ON/OFF, and spindle
speed can be operated by pressing the corresponding keys without the program running, but the
cooling can be also controlled in the course of program running.
Spindle rotation (CCW): SPINDLE CCW and LED ON.
Spindle stop: SPINDLE STOP and LED OFF.
Spindle rotation (CW): SPINDLE CW
and LED ON.
Cooling ON/OFF: After starting the cooling, the system displays
Cooling ON
and LED is
ON; after stopping the cooling, the system displays
Cooling OFF
and
LED is OFF.
Spindle gear shifting:
S01
～
S04, displaying of corresponding spindle speed on the
screen.
When the hydraulic chuck control function is valid, operate the external button or the pedal switch
to control the clamping and releasing of chuck which state interlocks with the spindle one.
When the hydraulic tailstock control function is valid, operate the external button or the pedal
switch to control the forward or the backward of tailstock which state interlocks the spindle one.
Note
：
The tool change cannot be executed by manual pressing keys in AUTO mode.
4.5.5 Override Tune
In
AUTO
mode, the running speed of program can be tuned by changing the feedrate override
without changing the set speed in programs or parameters
z
Feedrate override
tune the value defined by F in the program:
Содержание GSK928TE
Страница 1: ...GSK928TE II Turning Machine CNC System User Manual...
Страница 117: ...Programming Chapter Three Commands and Functions 112 G99 G01 X50 Z30 F0 2 G04 D2 G99 G01 X50 Z30 F0 2...
Страница 148: ...GSK928TE Turning CNC System User Manual 143 Connection Chapter One Interface 1 1 Interface Layout...
Страница 185: ...Connection Appendix 180 J3 1 AC220V J3 2 0V...
