GSK GSK928TE Скачать руководство пользователя страница 10

Страница: 10 / 187

GSK928TE

Ⅱ

Turning CNC System User Manual

Ⅲ

. Safety Suggestions for Programming

）

Setting a coordinate system

Incorrect coordinate system may cause the machine not to work as expected even if the

program is correct, which may injure the operator, and damage the machine as well as its

tool and workpiece.

2) Rapid traverse (positioning)

When G00 rapid traverse performs the positioning( nonlinear motion to position between

its starting point and end point), make sure that the path for the tool is safe before

programming. The positioning is to perform the rapid traverse, and when the tool and the

workpiece are interfered, the tool, the machine and the workpiece may be damaged, and

even the operator injured.

3) Applicability of user manual

The manual introduces in detail all functions of the system, including optional functions

and max. controllable ranges, which are subject to change with the machine. If there is

any doubt, please read the instruction for the machine

。

4) Functions of CNC system and machine

CNC machines depend on CNC systems, but also power voltage cabinets, servo systems,

CNC and the operator panels. It is hard to explain all the integrated functions,

programming and operation. Do not use integrated instructions not included in the manual

until they have been tested successfully.

Содержание GSK928TE




























































































































































































Результаты поиска

Содержание GSK928TE

Отзывы:

Бренды по названию

Популярные бренды

GSK GSK928TE, Руководство пользователя

Результаты поиска

Содержание GSK928TE

Отзывы:

Бренды по названию

Популярные бренды