GSK GSK928TE, Руководство пользователя

Страница: 135 / 187

Programming Chapter Four Programming Rules
130
4.5.1 Alarm Prompts in Programming Mode
No. Alarm prompt Definition Troubleshooting
1
REPEAT
INSTRUCTION
Repeat the same instruction in the block Delete the repeat one
2
REPEAT
PARAMETER
Repeat the same parameter in the block Delete the repeat one
3
INCOMPATIBLE
INSTRUCTION
Have two or many instructions which cannot be in the same
block in the block
Delete the redundant
one
4
REPEAT
INFORMATION
Repeat other content in the block
Delete the repeat one
5
ILLEGAL
INSTRUCTION
Have the undefined instruction in the block
Input it again
according to the
instruction list
6
ILLEGAL
INFORMATION
Have the unidentified code in the block
Delete the mistake
code and input the
right one
7
PARAMETER
ERROR
The parameter in the program excesses its specified range
Modify the mistake
parameters
8
MISSING
INSTRUCTION
Miss the required instruction code in the program
Input the correct
instruction code
9
DATA
OVERFLOW
The data exceeds its limit in the program Modify the program
10
BUFFER
OVERFLOW
The buffer zone is full and others cannot be stored in it
Delete the needless
or the seldom used
part programs
11
INCOMPATIBLE
INSTRUCTION
The diameter is less than chord line length in R
programming or the coordinates of starting point and end
point are not on the same circle in K, I programming Modify the program
12 EXCEED LIMIT
The arc between the starting point and end point is more
than 180° in K, I programming
Modify the program
13
DATA
OVERFLOW
The data in the block exceeds its range. Modify the program
14
F MISS
INFORMATION F value format must be matched with G98/G99, otherwise,
the system alarms
Modify the program
15
Z/X DIRECTION
ERROR Coordinates in L block following G71/G72 do not meet the
increment/decrement conditions
Modify the program
16
G71/ G72
INSTRUCTION
ERROR
L block following G71/G72 cannot include other motion
instructions except for G01/ G02/G03
Modify the program