GSK GSK928TE, Руководство пользователя

Страница: 63 / 187

GSK928TE
Ⅱ
Turning CNC System User Manual
58
4.6 Parameter Setting
There are 25 parameters ( P01
～
P25) in this system. Each parameter is defined to execute a
certain operating mode of the CNC system and the machine, and so some parameters must be
modified when the machine is installed and tuned.
Press to enter Parameter setting mode. The displaying is from P01 to P09 on the first
screen as Fig. 21:
Fig. 21 Parameter setting mode
Pressing or can page up or page down to display other parameters, and pressing
can display the previous or next parameter and its Chinese definition.
4.6.1 Parameter Specification
After the parameter number is selected, it is displayed in highlight and its name is displayed with
Chinese under the screen. The specific definitions are as follows:
4.6.1.1 P01 P02—Z Positive/Negative Overtravel (Soft Limit)
P01, P02 defines separately Z max. stroke of tool post in positive and negative direction. If Z
coordinate is not less than what is defined by P01 (positive overtravel), Z does not move instead
positively but negatively. If Z coordinate is not more than what is defined by P02 (negative
overtravel), Z does not move negatively but positively. Unit: mm.
4.6.1.2 P03 P04—X Positive/Negative Overtravel (Soft Limit)
P03, P04 defines separately the max. stroke of tool post in X positive and negative direction. If X
coordinate is not less than what is defined by P03 (positive overtravel), X does not move instead
positively but negatively. If X coordinate is not more than what is defined by P04 (negative
overtravel), X does not move negatively but positively. Unit: mm
Note 1:
Though the coordinates range is 8000- （ -8000 ） =16000 ， but the incremental moving
distance cannot be more than 8000 in AUTO mode.
4.6.1.3 P05—Z Rapid Traverse Speed
P05 defines Z rapid traverse speed in “Manual” mode and G00. The actual rapid traverse speed
is also controlled by the rapid traverse override. Z actual rapid traverse speed = P05* rapid