GSK GSK928TE, Руководство пользователя

Страница: 28 / 187

GSK928TE
Ⅱ
Turning CNC System User Manual
23
4.3.2.8 Copying a Part Program
Copy the content of current program to another new one and consider it as the current one.
Press
⑴
, and the system displays
%
.
In
⑵
put a program name which does not exist in the program name list, and press to
copy all contents of current program to the program whose number is input.
The new program name becomes the current one.
Example: Copy program of current program name % 00 to that of %05.
Press to input , and press , so the copy is completed.
Note: If the input program name exists, the system will prompt
File Existed
. At the moment,
press any keys to input again the program name which does not exist in the program area,
and then press
,
So the copy is completed.
4.3.3
Inputting/Editing Content of Part Program
CNC machining is defined that the system automatically completes the machining of workpiece
according to the part program sequence input by user. Each program is composed of many
blocks and each block consists of a block number, codes and data. Start the machine and gain
the standard workpiece after inputting the part program content according to the technology flow.
EDIT mode of CNC system uses the full-screen and part programs are employed with the file
management mode.
4.3.3.1 Automatically Creating a Block Number
Each part program contains many blocks and each block begins with the block number“
N****
”;
After a new program is created, the system will automatically generate the first block
number“
N0000
”; After one block is input and is pressed, the system will generate the
next block number. In the course of input, the increment of block number is defined by P23.
When a block is inserted, the system will automatically consider the 1/4 integer value of P23 as
the increment to generate the block number. When M98, M97, M91, M92, M93, M94 and others
codes related with the block number are executed, there are no repetitive block numbers in the
program, otherwise the system will alarm. If the above codes are not executed, the block number
can be repeated.
See Fig. 8 for a program generation and inserting a block number in a block (P23 value is 10).