GSK GSK928TE, Руководство пользователя

Страница: 55 / 187

GSK928TE
Ⅱ
Turning CNC System User Manual
50
4.5.2.4 Dry Run and Machining Run
After editing a part program, ensure the coordinate data on the screen is the same that of the
actual one and the relationship between blocks is right to avoid the bad effect caused by
inputting mistake program data. Switch to the machining run mode to execute the machining if
there is no mistake in the dry run program. Switch dry/machining run by pressing . LED
is ON in the top left corner when the program is running in DRY RUN mode.
Note 1:
In DRY RUN mode, the slider does not traverse and other auxiliary functions are invalid.
Note 2:
The initial run is the machining run mode when the system enters AUTO mode.
Fig.16 Single block stop
4.5.3 Displaying in a Part Program Running
When the part program is running, this system displays the running state, the dynamic run
coordinate, the workpiece planar solid graph, and the path of tool nose in the course of program
running, which is very convenient to monitor the running state of the machine and the program.
See the display as follows:
z
The dynamic coordinate, the dynamic planar graph or the path of tool nose when running
the part program
z Content of current running block
z Running state of spindle, cooling, speed, tool and other auxiliary function
z
Feedrate override
4.5.3.1 Coordinate Display in a Part Program Running
After entering AUTO mode, the system automatically selects the coordinate display mode as Fig.
17:
Fig.17 Program display in AUTO mode