GSK GSK928TE, Руководство пользователя

Страница: 67 / 187

GSK928TE
Ⅱ
Turning CNC System User Manual
62
P16 defines the duration of brake signal when the brake signal of spindle is output. Unit: 0.1
second.
4.6.1.13 P17—Z Lowest Initial Speed
P17 defines Z lowest initial speed with G00 or in “Manual” mode. Unit: mm/min.
When Z actual speed n is lower than the value of P17, there is no course of Z
acceleration/deceleration The value of P17 must be tuned to the proper one according to the
actual load of machine.
4.6.1.14 P18—X Lowest Initial Speed
P18 defines X lowest initial speed with G00 or in “Manual” mode. Unit: mm/min.
When X actual speed is lower than the value of P18, there is no course of the
acceleration/deceleration. The value of P18 must be tuned to the proper one according to the
actual load of machine.
4.6.1.15 P19—Z Acceleration/Deceleration Time
P19 defines Z acceleration time from the lowest initial speed (P17) to the max. speed (P5) in
linear movement with G00 or in
“Manual” mode. Unit: millisecond.
The course of Z acceleration is longer when the value of P19 is bigger. So the value of P19
should be smaller as possible to improve the efficiency according to loading characteristics.
4.6.1.16 P20—X Acceleration/Deceleration Time
P20 defines X acceleration time from the lowest initial speed (P18) to the highest speed (P6) in
linear movement with G00 or in “
Manual ” mode. Unit: millisecond.
The course of X acceleration is longer when the value of P20 is bigger. So the value of P20
should be smaller as possible to improve the efficiency according to loading characteristics.
4.6.1.17 P21—Initial Feedrate
P21 defines the initial speed of G01, G02, G03 and other feed commands in AUTO mode. Unit:
mm/min. There is no course of acceleration/deceleration when F speed defined by the program
is lower than the value of P21.
4.6.1.18 P22—Feed Acceleration/Deceleration Time
P21 defines the acceleration/deceleration time of G01, G02, G03 and other feed commands from
the specified speed value by P21 to 6000 mm/min in AUTO mode. Unit: millisecond.
By tuning P5, P6, P17
～
P22, this system can fit the different motors or the machine with the
different load to improve the machining efficiency.
4.6.1.19 P23—Increment of Block Numbers
P23 defines the increment value of the previous and next block number when the system
automatically generates the block number in
EDIT mode, i.e. D-value between blocks.
4.6.1.20 P24—Medium Gear Speed of Spindle
P24 defines the max. speed when the converter is used to control the spindle with the medium
gear and the 10V analog output voltage of system. P24 is invalid when the spindle is controlled
by the multi-gear switching value.
Unit: r/min.
4.6.1.21 P25—Bit Parameter 3
●
P25 bit specifications