GSK GSK928TE, Руководство пользователя

Страница: 32 / 187

GSK928TE
Ⅱ
Turning CNC System User Manual
27
inserting position.
(3) Input the inserting content.
(4) Insert the content before the address character pointed by the cursor.
Example
：
Insert
1
between
X
and
0
of
N0020 G0 X0.0 Z0.0
. Move the cursor to
the under of
O
behind of
X
，
and input
1
.
N0020 G0 X10.0 Z0.0
is displayed.
Note
： The system requires there is a space between each word (a letter adding the following
digits) in block. The system can automatically judge and generate a space in the course
of inputting when the program is edit, but cannot automatically judge in the course of
inserting, and so the user will input the space to ensure the complete program.
4.3.3.6 Deleting a Word in a Block
Delete the invalid content.
(1) Press to move the cursor to the required address character.
(2) Press to delete the address character.
4.3.3.7 Modifying a Word in a Block
Adopt two methods to modify an address character of block according to the input mode
(INSERT/REWRITE).
INSERT mode: use the insert and the delete methods together.
(1) Press
，
move the cursor to the required address character.
(2) Input the new word.
(3) Delete the invalid word according to the operation of deleting the content of block.
REWRITE
mode: modify the character where the cursor points.
(1) Press to switch to
REWRITE
mode (the cursor pointing to the address character in
highlight square).
(2) Press to the required address character.
(3) Input the new address character, and the cursor points to the next one.
Example
：
Rewrite
X
of
N0020 G0 X0.0 Z0.0
to
U
.
(1) Switch to
Rewrite
mode.
(2) Move the cursor to the under of
X
.
(3) Input
U
.