GSK GSK928TE, Руководство пользователя

Страница: 74 / 187

GSK928TE
Ⅱ
Turning CNC System User Manual
69
4.7 Tool Offset Setting Mode
This system can define 8 groups tool offset value ( T1
～
T8). Each group offset has two data in X,
Z direction. The offset group amount automatically generated by manual toolsetting is the same
as the used tool ones. Other offset data must be input by keyboard. No. 9 offset value is the
coordinate setting value after executing the machine zero return (machine home return). Do not
use T*9 in the command, otherwise the system alarms “PARAMETER ERROR”.
Select to enter the offset setting mode as Fig. 23:
Fig. 23 Offset mode
4.7.1 Searching a Tool Offset Value
The particular content of each offset value can be viewed in OFFSET mode. Press or
to search the pervious or the next offset value. Press or to search the
offset value of page up or page down, and 9 blocks offset value in each page are displayed.
4.7.2 Inputting a Tool Offset by Keyboard
Input the offset by keyboard
：
absolute and incremental input
Absolute input of offset
● Select the offset setting mode.
● Press to move the cursor in highlight to the offset number to be modified (the
selected offset number is displayed under the screen when moving the cursor).
● The highlight square behind the offset number is displayed on the screen by pressing .
● Input the offset value by keyboard. Press to cancel the wrong input value and input
again.