GSK GSK928TE, Руководство пользователя

Страница: 41 / 187

GSK928TE
Ⅱ
Turning CNC System User Manual
36
M03 M04 M05 M08 M09 M10 M11 M32 M33 M21 M22 M23 M24. Omit it if
the first digit of M code is zero. The function is the same that in AUTO mode. For the explanations
of M codes, see
Programming
.
When MDI is error, the system prompts “DATA INVALID” and disappears by pressing . In
MDI mode, when the data is input or the coordinate is set, instead of is
pressed, the system prompts “DATA INVALID” to escape. For example: input orderly T22 and
press , the system prompts “DATA INVALID” and escapes.
4.4.11 Manual Spindle Control
In “Manual” mode, the rotation (CCW/CW) and stop of spindle can be controlled by the keyboard
(if the feed/spindle hold knob is set in the position where the spindle is forbidden to rotate, the
spindle cannot be started even if the spindle rotation (CCW/CW) key is pressed. See
User
Manual
from the machine manufacture for gears of feed hold knob and mark symbols, and
Connection
in the manual if the spindle needs to be connected separately).
Spindle rotation (CCW)
Displaying
：
SPINDLE CCW and LED ON
Spindle stop
Displaying ： SPINDLE STOP and LED OFF
Spindle rotation (CW)
Displaying
：
SPINDLE CW and LED ON
Note:
Whether its brake signal is output is defined by MSP bit of P12 when the spindle stops. If
P12 MSP is 1, there is the brake signal when the spindle stops. If MSP is 0, there is
nothing. The time sequence relationships of the spindle brake, starting and stopping
signal are as follows:
1 ） In pulse control mode ， M3, M4, M5, MSP output time sequence ：
M3 or M4
M5
MSP
T1
T2
T3
T1