GSK GSK928TE, Руководство пользователя

Страница: 33 / 187

GSK928TE
Ⅱ
Turning CNC System User Manual
28
The end is
：
N0020 G0 U 0.0 Z0.0.
4.3.3.8 Skipping a Block
Add
/
before the block number
N
of block, and the system will skip the block to execute
the next one when executing the program.
(1) Switch to
INSERT
mode.
(2) Move the cursor to the required block and press to move the cursor to the under of
the block number
N
of block.
(3) Sequentially press two times: the first time, insert before
N
; the second
time, insert
/
before
N
.
4.4 Manual Mode
In “Manual” mode, the motion of slider, the starting/stopping of spindle, cooling ON/OFF, manual tool
change, the program reference point return and the machine zero return in X, Z direction, and other
functions can be completed by operating the keyboard. When P11 Bit3 is set to 1, the actual spindle
speed can be displayed real time; when P11 Bit3 is set to 0, the programming spindle speed is
displayed. When the machine is equipped with the hydraulic chuck and the tailstock, the system can
control the operation of the hydraulic chuck and the tailstock by a pedal switch or external keys. They
keep interlock between the hydraulic chuck, the tailstock and the spindle.
Press to enter Manual mode. There are JOG Jog mode and JOG Step mode. The initial
mode is JOG . Press to switch between JOG mode and Step mode. If the system is equipped
with the MPG, the system can adopt MPG control mode. JOG mode. is as follows:
Fig.11 JOG mode
4.4.1 Manual JOG
In JOG mode, press down a manual feed direction key, and the slider will continuously