GSK GSK928TE, Руководство пользователя

Страница: 75 / 187

GSK928TE
Ⅱ
Turning CNC System User Manual
70
● Press to confirm the input
，
and store it into the parameter area of current selected offset
number.
Incremental input of offset data
● Select the offset setting mode.
● Press to move the cursor in highlight to the offset number to be modified (the
selected offset number is displayed under the screen at the same time when moving the
cursor).
●
The highlight square behind the offset number is displayed on screen by pressing .
● Input the data by keyboard. Press to cancel the wrong input and input again. Press
to count the input value and the previous value of selected parameter. If the input
value is positive, the system adds the input value to the previous value and saves the sum
automatically. If the input value is negative, the system reduces the input value from the
previous value and saves the remaining value automatically.
4.8 Diagnosis
This system has the self-diagnosis function, displaying the state of external input/output interface
signal, the spindle speed and so on.
Press to enter DIAGNOSIS mode as Fig. 24:
Fig. 24 Diagnosis mode
Note:
If the P11 Bit3 is 0 (do not detect the spindle encoder), the encoder lines in Fig. 24 will
not be displayed. When the system is not equipped with the spindle encoder or the
spindle stops, Encode lines=0000 is displayed. Press the other mode keys to escape
from the display.
4.8.1 Diagnosis Definition of Input Interface
Input 1 ：