GSK GSK928TE, Руководство пользователя

Страница: 93 / 187

Programming Chapter Three Commands and Functions
88
K sign decide the direction of the thread run-out; when K is omitted, there is no the thread run-out;
when there is no I, I=K/2.
Example
：
G00 Z100 X20
；
G33 K3 I1.6 U20.7 P2
；
End point (Z101.60
，
X40.70)
6. G33 end face rotary machining thread: as Fig. 9-6
K sign decide the direction of the thread run-out; when K is omitted, there is no the thread run-out;
when there is no I, I=K/2.
Example
：
G00 Z100 X20
；
G33 K3 I1.6 D1.8 U20.7 P2 ；
End point (Z99.80
，
X40.70)
Generally, repeat the thread cutting many times in the same path from the roughing to the finish
turning when the thread is machined. The thread cutting starts after receiving 1-turn signal from
Starting point
End point
Starting point
End point